EASA Part 66 Category B1.2 Module 16 - Piston Engine
Classroom | Intermediate | 2 Weeks
EASA Part 66 Category B1.2 Module 16 - Piston Engine
EASA Part 66 Category B1.2 Module 16 - Piston Engine
Air Service Training Ltd (AST) is a wholly owned subsidiary of Perth College UHI, part of the University of the Highlands and Islands (UHI). AST remains a world leader in the field of Aviation training and has been since 1931, making it arguably the longest-established organisation of its kind.
The AST engineering training facilities are situated on the spacious Perth College UHI campus and also at Perth Airport, which is four miles north of 'The Fair City' of Perth in Central Scotland. It has an attractive rural location and is less than two hours flying time from London, while the major Scottish cities of Glasgow, Edinburgh and Dundee are all within an hour's drive.
This course is aimed for experienced engineers seeking a short theory based course.
You would study the following parts of the EASA Syllabus
Module 16. Piston Engine
16.1 Fundamentals
Mechanical, thermal and volumetric efficiencies;
Operating principles — 2 stroke, 4 stroke, Otto and Diesel;
Piston displacement and compression ratio;
Engine configuration and firing order.
16.2 Engine Performance
Power calculation and measurement;
Factors affecting engine power;
Mixtures/leaning, pre-ignition.
16.3 Engine Construction
Crank case, crank shaft, cam shafts, sumps;
Accessory gearbox;
Cylinder and piston assemblies;
Connecting rods, inlet and exhaust manifolds;
Valve mechanisms;
Propeller reduction gearboxes.
16.4 Engine Fuel Systems
16.4.1 Carburettors
Types, construction and principles of operation;
Icing and heating.
16.4.2 Fuel injection systems
Types, construction and principles of operation.
16.4.3 Electronic engine control
Operation of engine control and fuel metering systems including electronic engine control (FADEC);
Systems lay-out and components
16.5 Starting and Ignition Systems
Starting systems, pre-heat systems;
Magneto types, construction and principles of operation;
Ignition harnesses, spark plugs;
Low and high tension systems.
16.6 Induction, Exhaust and Cooling Systems
Construction and operation of: induction systems including alternate air systems;
Exhaust systems, engine cooling systems — air and liquid
16.7 Supercharging/Turbocharging
Principles and purpose of supercharging and its effects on engine parameters;
Construction and operation of supercharging/turbocharging systems;
System terminology;
Control systems;
System protection.
16.8 Lubricants and Fuels
Properties and specifications;
Fuel additives;
Safety precautions.
16.9 Lubrication Systems
System operation/lay-out and components
16.10 Engine Indication Systems
Engine speed;
Cylinder head temperature;
Coolant temperature;
Oil pressure and temperature;
Exhaust Gas Temperature;
Fuel pressure and flow;
Manifold pressure.
16.11 Powerplant Installation
Configuration of firewalls, cowlings, acoustic panels, engine mounts, anti-vibration
mounts, hoses, pipes, feeders, connectors, wiring looms, control cables and rods,
lifting points and drains.
16.12 Engine Monitoring and Ground Operation
Procedures for starting and ground run-up;
Interpretation of engine power output and parameters;
Inspection of engine and components: criteria, tolerances, and data specified by engine manufacturer.
16.13 Engine Storage and Preservation
Preservation and depreservation for the engine and accessories/systems.